Linked constant-acceleration motion

Works along one axis with signs. Each section starts from the velocity and position at the end of the previous one.

  • Runs in your browser
  • No upload
  • Check before download

Works along one axis with signs. Each section starts from the velocity and position at the end of the previous one. AT, VT, AS and VS choose which data you know. AS can give two non-negative times. Optional v and s checks use a relative consistency tolerance of 1e−10. Drag is not included.

Model, grammar and limits

v=u+at; s=ut+at²/2; s=(u+v)t/2; linked sections

Numbers can have up to 48 characters, with a decimal point or e, and no thousands separators. Curves use 2 to 501 samples plus up to 16 section endpoints. Use up to 32 forces or sources and up to 16 sections. Springs take 1 to 20 periods with at least 8 samples per period; pendulum angles run from 0 to 179°. Magnus covers −40 to 35 °C over water and −40 to 0 °C over ice; relative humidity 0 to 100%, pressure 5 to 200 kPa, and vapor pressure must be below total pressure. Backup is limited to 1 MiB. Invalid, non-unique or unresolved data are rejected.

Results are numerical idealizations in SI units, shown with up to 10 digits; CSV keeps the numeric values and units. 9.80665 m/s² is the conventional standard g, not local gravity. Uncertainty in your inputs or the model is not estimated, and nothing here is a physical approval.

Calculation and backup stay in this browser. Workers stop after 15 seconds, or when you edit, reset or cancel. Inputs are never uploaded or stored. Input data, formulas and filenames are never sent. Only with your optional consent, Refentra sends aggregate counts of actions and outcomes, without input content.

Linked motion sections

Use the chosen model

  1. Model, grammar and limits

    Works along one axis with signs. Each section starts from the velocity and position at the end of the previous one. AT, VT, AS and VS choose which data you know. AS can give two non-negative times. Optional v and s checks use a relative consistency tolerance of 1e−10. Drag is not included.

  2. Calculate

    v=u+at; s=ut+at²/2; s=(u+v)t/2; linked sections. Numbers can have up to 48 characters, with a decimal point or e, and no thousands separators. Curves use 2 to 501 samples plus up to 16 section endpoints. Use up to 32 forces or sources and up to 16 sections. Springs take 1 to 20 periods with at least 8 samples per period; pendulum angles run from 0 to 179°. Magnus covers −40 to 35 °C over water and −40 to 0 °C over ice; relative humidity 0 to 100%, pressure 5 to 200 kPa, and vapor pressure must be below total pressure. Backup is limited to 1 MiB. Invalid, non-unique or unresolved data are rejected.

  3. Download CSV report

    Results are numerical idealizations in SI units, shown with up to 10 digits; CSV keeps the numeric values and units. 9.80665 m/s² is the conventional standard g, not local gravity. Uncertainty in your inputs or the model is not estimated, and nothing here is a physical approval. Calculation and backup stay in this browser. Workers stop after 15 seconds, or when you edit, reset or cancel. Inputs are never uploaded or stored. Input data, formulas and filenames are never sent. Only with your optional consent, Refentra sends aggregate counts of actions and outcomes, without input content.

Model questions

Model, grammar and limits

Works along one axis with signs. Each section starts from the velocity and position at the end of the previous one. AT, VT, AS and VS choose which data you know. AS can give two non-negative times. Optional v and s checks use a relative consistency tolerance of 1e−10. Drag is not included. v=u+at; s=ut+at²/2; s=(u+v)t/2; linked sections

Unit

Initial velocity; Initial position; Curve sample count (1); Known quantities; Acceleration; Duration; Velocity; Signed displacement; Admissible crossing time; Known v for consistency (optional); Known s for consistency (optional). Numbers can have up to 48 characters, with a decimal point or e, and no thousands separators. Curves use 2 to 501 samples plus up to 16 section endpoints. Use up to 32 forces or sources and up to 16 sections. Springs take 1 to 20 periods with at least 8 samples per period; pendulum angles run from 0 to 179°. Magnus covers −40 to 35 °C over water and −40 to 0 °C over ice; relative humidity 0 to 100%, pressure 5 to 200 kPa, and vapor pressure must be below total pressure. Backup is limited to 1 MiB. Invalid, non-unique or unresolved data are rejected.

Model results

Results are numerical idealizations in SI units, shown with up to 10 digits; CSV keeps the numeric values and units. 9.80665 m/s² is the conventional standard g, not local gravity. Uncertainty in your inputs or the model is not estimated, and nothing here is a physical approval.

Download input backup

Calculation and backup stay in this browser. Workers stop after 15 seconds, or when you edit, reset or cancel. Inputs are never uploaded or stored. Input data, formulas and filenames are never sent. Only with your optional consent, Refentra sends aggregate counts of actions and outcomes, without input content.